|
Post by jacobgardner on Oct 19, 2014 1:04:09 GMT -8
I've found my computer running 10-20 dllhost.exe3/Com Surrogate processes tapping out my CPU and memory over the last 2-3 days. When I end the process tree they will disappear then resume after about 10 minutes.
From what I've read it seems like Poweliks?
I've run Malware Bytes, aswMBR, MBRCheck, TDSSKiller, and Security essentials without finding any virus/malware both in normal and safemode.
Any help would be appreciated.
Thanks Jake
|
|
Quads
Malware Removalists
In New Zealand
Posts: 9,387
|
Post by Quads on Oct 19, 2014 9:08:01 GMT -8
Do Not use advanced tools or any tools used on this board without supervision.
Malware removal can be difficult over a forum as it is, without a user doing their own actions, the tools used are more advanced and thus have added danger that comes with that. This board is protected so that only Malware removers, Admin and Mods can reply to a users thread but all members can create a thread asking for removal of Infection(s)
Make changes to your computer only when the Malware Expert specifically states it. The Malware Experts request specific steps to be followed, as some malware removal requires multiple steps and evaluations along the way. When you take other advice or make other changes, this often negates the work done by the expert, and can sometimes result in an inoperable system. This also includes any tools or steps other than those the from the Malware Expert. We need to be certain about the state of your system to see what actually is going on, and what is required to fix the system while not harming the rest of the system. Most often, well-intentioned independent efforts can make things much worse. The malware remediation tools are more advanced than othe tools, and can often create bigger problems when used without expert guidance.
Follow all the directions in order, and to the end. Please perform all steps in the order they are listed in each set of instructions. As you might imagine, some steps are a bit complicated. If things are not clear, be sure to stop and let the Malware Expert know the problem. We don't mind clarifying a situation, as others might have the same question. If a tool does not run as expected, don't force it. Stop the steps, and update the forum topic with the current situation. It is better stop and let us know, than to force a tool to run and cause bigger problems. Also, when your computer is clean and we are finished, the Expert will tell you we are finished. Malware removal is a process that requires verification, and we want to be sure your system is completely clean before we're done.
When describing your problem, provide as much information as possible, as soon as possible. Explain as best you can what happens with your computer, e.g. it beeps three times, black screen with cursor then goes no further, system gets stuck at the Windows startup logo, etc. This helps the expert to understand what is happening to the system and what may be wrong. If your computer cannot start up successfully please provide details about your installed Windows Operating System, including the Version, Edition and if it is a 32bit or a 64bit system. (e.g. Windows Vista Home Premium 32-bit)
When the user follow instructions and things still go a little haywire, and it does happen, it is up to us to sort the extra problem out.
Take longer to read if your language is not English, so that hopefully it is understood.
Reply stating you have read the post fully.
I also if it is busy (have a lot of systems at once to deal with) like being in a supermarket checkout line, waiting their turn, I use the forum like a checkout line.
Also what is your Operating System, including is it is 32 bit or 64 bit.
Quads
|
|
|
Post by jacobgardner on Oct 19, 2014 12:14:17 GMT -8
Read and understood.
I'm running a Toshiba Satellite P500 Model Number PSPG8U-0P9026
Windows 7 Professional (x64) Service Pack 1(Build 7601)
In addition, I've noted that something keeps resetting IE security options to prevent downloads.
|
|
Quads
Malware Removalists
In New Zealand
Posts: 9,387
|
Post by Quads on Oct 19, 2014 13:30:30 GMT -8
You may want to try using Safe Mode with Networking to do the below instructions Read Slowly and all of it.Please download www.bleepingcomputer.com/download/farbar-recovery-scan-tool/ You need to download the 64 bit version.Place FRST64.exe onto your desktop from where ever it downloaded to. Start FRST64 that is on your DesktopThe tool will start to run.When the tool opens click Yes to disclaimer. (if it does) Press Scan button. It will make a logs ( FRST.txt and addition.txt) on your Desktop Please attach the log in your reply back. Or open the logs in notepad and copy the logs and paste back in a message as a reply. IF ADDITION.txt does not want to upload go to Wikisend wikisend.com/and upload the addition.txt there, then post the download link back in a message Quads
|
|
|
Post by jacobgardner on Oct 19, 2014 14:19:52 GMT -8
|
|
Quads
Malware Removalists
In New Zealand
Posts: 9,387
|
Post by Quads on Oct 19, 2014 14:31:41 GMT -8
OK
You not only have Poweliks but also PUP's and at some point Zeroaccess, Now depending on the variant of Zeroaccess it altered or deleted Windows Servces that needs to be fixed or checkked that they are correctly set in the Registry.
Quads
|
|
|
Post by jacobgardner on Oct 19, 2014 15:04:45 GMT -8
Hmm...
That sounds suboptimal.
What do you recommend.
Jake
|
|
Quads
Malware Removalists
In New Zealand
Posts: 9,387
|
Post by Quads on Oct 19, 2014 15:12:52 GMT -8
I am having a think while I am doing a script for another user.
Quads
|
|
Quads
Malware Removalists
In New Zealand
Posts: 9,387
|
Post by Quads on Oct 19, 2014 18:21:18 GMT -8
You may want to read carefully all of this message first before starting the steps.
NOTE: This script was written specifically for this user, for use on that particular machine. Running this on another machine may cause damage to your operating system
Download the script attached, needs to be the same file name as well (fixlist.txt), have it on the Desktop, so that fixlist.txt is next to FRST64.exe,
DO NOT DRAG AND DROP to download the script, it won't work for FRST (Right click on the attachment link (not the normal left click) and from the menu choose Save As or Save Link as.)
The script tells FRST what to do.
Start FRST that is on the desktop When the tool opens click Yes to disclaimer. (if it still does)
Press the Fix button just once and wait.
The tool will make a log on the Desktop (Fixlog.txt) please post it to your reply (attach or paste)
Quads
|
|
|
Post by jacobgardner on Oct 19, 2014 21:47:30 GMT -8
|
|